cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
677
Views
0
Helpful
7
Replies

3750 Stack

chandan.j
Level 1
Level 1

Hi, 

 

I'm in a situation  where i need to add the extra switch which is  WS-C3750V2-48PS with C3750-IPBASEK9-M IOS to the existing stack which contains two ws-c3750x-24p with C3750E-UNIVERSALK9-M switches. And yesterday i tried to add the extra switch to my existing stack but the members in stacks are not recognizing this newly added switch :( all the switches are running with 12.2(55)SE5 Software Version.

My question is will the 3750X-24P and C3750V2-48PS  can be stackable ??

please someone help me 

7 Replies 7

Mark Malone
VIP Alumni
VIP Alumni

Have a look at this there is certain restrictions software and feature sets need to match for stacks to form fully

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_53_se/configuration/guide/3750xscg/swstack.html#wp1208349

is it possible to downgrade the ipbase IOS to universal base IOS ?

as i mentioned earlier am running with 12.2(55)SE5 Software Version in all the switches.

why the stacks are not able to recognise the new switch ?

Should i downgrade the 3750V2 switch into universal base IOS ? is this possible ?

because i cant change the IOS of c3750x switches as these switches are in production.

 

 

Hi Markmalone,

 

could you please help me .

Joseph W. Doherty
Hall of Fame
Hall of Fame

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

Technically, the two series should stack.  However, what license are your 3750Xs running?  If they are running LANBase, they won't stack with other feature sets.

Hi Joseph,

 

Please find the details below.

 

Switch Ports Model              SW Version            SW Image                 
------ ----- -----              ----------            ----------               
1.   WS-C3750V2-48PS    12.2(55)SE5           C3750-IPBASEK9-M   

2.   WS-C3750X-24P      12.2(55)SE5           C3750E-UNIVERSALK9-M     (Running with ipbase)

 

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

As far as I know, you should be able to stack that combination.

You're adding the 3750V2 to the stack?  Has it's config been erased and you only power it on after connecting stack cables?

Hi,

 

Yes am adding 3750V2 to the existing stack. yes all the configuration has been erased and after connecting the stack cables i'm powering on the 3750V2 switch.

Review Cisco Networking for a $25 gift card