Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all, Recently, I prepared and deploy a network monitoring system to monitor the new generation Nexus connected network. With using snmpwalk to query the interfacs information from the Nexus 5000 switch (one Nexus 2000 is connected to it via ...
Dear all, Recenetly, I get involved the implmentation IPv6 Cisco Netwflow collector utility to capture the ipv6 netflow data from Cisco 6509E-VSS (Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXI5, RELEASE ...
Recently, I deploy the OpenView to collect the SNMP trap from Cisco 440 Wireless Controller. As from the received trap, I found two categories of trap is not identified by MIB definition file even I get search from Cisco web site. As from the compl...
As business need, a Ciscowork LMS 2.2 server is required to conduct maintenance with my cutsomer. To consider the recommedation from Cisco, the customer like to upgrade LMS 2.2 to LMS 2.5.1 but no information about support and software subscription ...
I worked with a PIX515E-resticted bundled package (i.e. 32M RAM and 3 interface). Recently I found that there a large amount of ICMP from two to three workstations from the outside interface (the regional office) to my inside network (An access-list...
As check using command 'sh mls nde' and capture the netflow data using wireshark, the C6509E is confirmed to issue Netwflow version 9 data to the collector.VSS6509#show mls nde Netflow Data Export enabled Exporting flows to 10.1.15.22 (9996) 10.1.1...
The following command has already applied to the device, but I can still found no IPv6 netflow data to be existed in command 'show ip cache flow' output. Is there any command or method to check whether C6509-VSS has already export the IPv6 netflow d...
Thanks Laurent in advanced for such fast reply. In additonal to the command applied to the device, I already add the following command to the 6509E last week============================================================================================...
Hi nkhawaia, There is a operation issue to fix those 3 PCs as it controlled by Corp's Administrator and I can only provide advise and notify on that issue. Beside I have apply the access-list to deny all the ICMP echo and echo-reply (exclude som...
How about I change the access mode of the related .pcf file to read only with password typed over the .pcf. Can I applied such approach to allow VIP user to establis the VPN connection without typing any password on his notebook (the VPN password al...
