Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it possible to set a spanning tree port cost on a meraki switch? I can't find it anywhere...is it yet another super common feature that Meraki doesn't support?
I'm encountering an issue with using EEM to generate SNMP traps from a syslog event. I want to include the syslog message as a varbind in the trap, but the $_syslog_msg variable will not resolve, rather the variable is a string with the literal valu...
I am seeing currently seeing an issue where multicast traffic is not reaching client boxes at a particular location. When I check the first router upstream from the client everything looks normal with the joins, but the multicast isn't getting that ...
I'm having a problem with extremely high CPU utilization on a 6506-E and have not been able to determine the cause. Any help would be appreciated.I suspect that the high CPU is due to a very large amount of multicast traffic routed to the device. T...
Thanks for the reply. To be fair, the only reason I'd like to manipulate the port costs is to force a particular topology in an existing bad design.I cannot change the overall design at the moment; this would have been a temporary measure.I can work...
That worked well, although I should point out that the applet<>TCL converter did not properly substitute underscores for hyphens.
e.g.
enterprise-oid should convert to enterprise_oid
Thanks!
The LX4 type transceiver is not compatible with LR or SR SFP+ transceivers. LX4 is only compatible with a corresponding LX4, for which there is no SFP+ equivalent.
You will need new xenpacks.
You could try applying an ACL to your existing static RP statement like so... access-list 10 deny 225.4.1.81access-list 10 permit anyip pim rp-address 192.168.15.253 10
