Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I apologize in advance for such a simple question.I am creating backup text files for many of my old out of support 2828 and 1900 switches.The way I'm creating the backup file is to telnet into it, do a sh run and then mark it and copy it into notepa...
I am in the process of getting a 3750 switch stack installed. The stack will use layer 3 and will replace a 5505 layer 2 switch. The 5505 has all ethernet ports set to vlan 110.My 3750 stack will also have all fasethernet ports in vlan 110. I wanted ...
I have been asked to develop a way to connect a non-company server to one of my closet 5509's that runs several vlans on a couple of floors on my building. The 5509 has no RSM and is connected to larger layer 3 switch...6509.I have been told that I ...
Pardon me if this question belongs on the General Security ForumI have read the Document ID:9906 Configuring TACACS+ on the Catalyst 1900.I have a 1924 configuration that has TACACS on it. The switch is not on my network yet...I'm using a console cab...
I have a 1924 I'm trying to get a config on. I have the current config in a text file. I have run into 2 problems. (1)If I try to cut and paste the config into the switch tacacs gets errors on the 2nd line after the login.2nd problem is there seems t...
I want to try and add some clarificationI have 2 3750-48POE's in a stack...so I had 96 portseach fastethernet interface on both 48 port switches was configured like this:!interface FastEthernet1/0/1 switchport access vlan 110 switchport mode access s...
hello,I already have vlan 110 in the database. I am getting ready to replace a layer 2 5505 in vlan 110 with a layer 3 3750 that will have all its ports in vlan 110. Also, as I understand VTP is layer 2 not layer 3I'm staging the 3750 getting ready t...
Output from a sh versh verCisco Catalyst 1900/2820 Enterprise Edition SoftwareVersion V9.00.05 written from 010.004.180.153Copyright (c) Cisco Systems, Inc. 1993-1999I am running Enterprise EditionShould I not be able to copy tftp my text config...
Normally, I would have several switches already configured and all I would need to do would be to change the ip address, some monitor ports and a hostname...I find myself in a situation where I need to replace a 1912 with a 1924 because I'm out of sw...
The only thing I'm "protecting" is a periodic ftp.Actually, now that I've thought it over it may be a 5505Is the RSM what allows an access list to be used?.... if so that may be a problem ...its connects several floors to some 6500s in our DataCenter...
