Billm
Beginner
Beginner
Member since ‎03-01-2016
‎09-05-2018

User Statistics

  • 31 Posts
  • 0 Solutions
  • 49 Helpful votes Given
  • 25 Helpful votes Received
Recent Badges
10 Helpful Vote
1 Helpful Vote
20 Replies
10 Replies
5 Replies

User Activity

Is it normal for a switch to have both the interface bia MAC address and the VLAN MAC address of the connected switch in its table? I have a 2960 connected to a 3850 in a trunk. The 2960 has a layer 3 vlan(20) configured with an IP Address. I connect...
This is driving me insane. I've looked at multiple posts, nothing works.   I just want access to vty lines from my inside network. The latest:   ip access-list standard Inside-Machinespermit 10.10.0.0 0.0.255.255   line vty 0 4access-class Inside-Mac...
I have attached a diagram and router configurations. We have a Primary Internet pipe(Blue) and a Secondary Internet pipe(Red) to the same ISP. eBGP is running on the internet interfaces and iBGP is running on the inside interfaces. We are receiving t...
I found that I didn't have the correct boot statement and ended up with: Switch: After considerable time and research I brought the switch back. You need to have a workable USB stick with the Switch Image loaded. These were my steps. I hope this may...
Tried booting from usbflash0, stuck in a loop...help! switch: dir usbflash0:Directory of usbflash0:/     1  -rw-  303772864  cat3k_caa-universalk9.SPA.03.06.06.E.152-2.E6.bin3705896960 bytes available (303824896 bytes used)switch: boot usbflash0:cat3...
Community Statistics
Member Since ‎03-01-2016 10:53 AM
Date Last Visited ‎09-05-2018 12:26 AM
Posts 31
Total Helpful Votes Received 25