Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Three years ago I've bought a PIX Bundle and I received 2 PIX hardwares for a high available solution. Now I bought a ASA5520 Bundle (ASA5520-BUN-K9) and I received just 1 ASA hardware, is it right ??? As I need high availability, may I have to bu...
Hi all,I have a CallManager 4.1(2) with about 2000 IP telephones. We're planning to upgrade to CallManager version 5, but Cisco has a new policy that I have to buy the CallManager and the telephone licences together. What do I do ? I've already bough...
Hi,I've bought an ASA5520 and I could not access the console port. Another thing I think it's not normal is because the Status LED is amber as soon as turn the switch on. Is this a hardware problem ???Thank you.Neirival (Brazil/Angola)
Hi all,I have a problem with QoS. Everytime a voice packet go outbound through an Ethernet interface the router remove the DSCP marcation 46 (EF) and marks as 0. Serial interfaces work fine.I've tried with different IOS versions but the problem is th...
Hi,Yes, I have no response from console and I can access other Cisco devices.I think you are right. It's a DOA.Thank you and regards.Neirival de Sousa (Brazil/Angola)
Hi Martin,You are the man !!!The router connection was through a Port-Channel and I'd configured qos just on the physical switch ports, not on the virtual Port-Channel. That was just insert on the Channel interface the command # qos trust dscp and ev...
I have 1300 (2,4GHz) and 1400 (5,8GHz) series bridges with parabolic antennas of 21 and 28dbi. Now I'm trying to activate a link about 21km away but I still didn't get it work.If you activate your link please let me know if you found any problem.
