Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi - i have a pair N9K 93180YC-EX, and they have a number of FEX's connected to them. We moved all the hosts off -one- of the FEX's, and it was then either unplugged from the parent switches or powered down (im not sure i wasn't involved in the physi...
Is there something different about the FTP client on CAT9K (in my case im using C9410R) compared to other / older Cisco equipment. I usually upload a new IOS version using FTP, and i haven't been able to successfully do that on a CAT9K. In the exampl...
Hi All - sorry i'm not too experienced with API's and development, hopefully this question is OK; I am interested in using the API in Cisco Prime Infrastructure (3.7.0). Following the built in tutorial on Prime (https://Server/webacs/api/v4/?id=tutor...
Hi,I have configured Netflow on our Cisco devices and this has been working for some time; flow record <Flow_Record_Name>match datalink vlan input---SNIP---collect timestamp sys-uptime lastflow exporter <Flow_Export_Name>destination <<IP_Address>>sou...
Hi all - i need to configure SNMPv3 on a Nexus 5K, and ensure SNMP requests are only permitted from certain IP ranges. It's not clear to me, how to apply an ACL to an SNMPv3 user/group on the Nexus. Would anyone have a sanitized configuration example...
i *believe* i have already done this - part of my decomission process was;conf t!no fex 151I note in your config example, it shows the command being run from (config-fex) context, but i dont think that would have any effect on the command being run. ...
I got this all working, i ended up using 'Postman API platform' which created the Auth details for me, and could export for use in PowerShell.. This was what i required; $headers = New-Object "System.Collections.Generic.Dictionary[[String],[String]]"...
Thanks, yes 5k is correct i must have copied OS version from the wrong switch. I will look at upgrading to 7.2(0)N1(1), to allow this feature.
Thanks !
- Luke
