About mushamim

mushamim · 08-22-2014

On WLC5508 with 7.6.110.0 image, what could be the reason for MAP AIR-CAP1552SA to drop off from its RAP for 7 hours after 15 days of working? Apparently, the MAP joined back after seven hours with following messages below. (I have obfuscated actual ...

mushamim · 09-03-2015

IR800#clear crypto ikev2 sa*Sep 3 16:33:10.627: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down*Sep 3 16:33:10.629: %IKEV2-5-SA_DOWN: SA DOWN*Sep 3 16:33:42.085: %IKEV2-5-OSAL_INITIATE_TUNNEL: Received request to est...

mushamim · 09-03-2015

For others having this issue: Please first check if the crypto session is established as expected using 'show crypto session' and 'show crypto ikev2 sa detailed'. They should show UP-ACTIVE for the former and 'Negotiation done' for the latter command...

mushamim · 01-29-2015

I hacked a way to make carriage return in tclsh work. You will need the following two lines after your command line needing a carriage return (and sometimes a set before the command as well):rtypeahead "\r" So, for instance, to do a repeated tclsh co...

mushamim · 11-04-2014

Thanks, salodh and mohanak!This CSCuo06388 is the closest issue I find to the one described in our scenario. It has been apparently fixed in Rel 8.0(0.72).In this bug report, the log displays the AP at least has the image. In our original issue, the ...

mushamim · 11-26-2013

Re: Sep 28 15:00:06.240: Client 0011.21ce.da30 failed: WPAIE not found and requiredWhen using Cisco AP and Cisco WGB/Universal Client, the above message indicates while both device's radios, eg 5GHz radio, have the correct SSID, there is a mismatch i...

Member Since	‎10-22-2006 07:28 PM
Date Last Visited	‎10-22-2025 09:02 PM
Posts	8
Total Helpful Votes Received	5

User Statistics

User Activity

Cisco AIR-CAP1552SA MAP drops off showing spamApTask0 messages

For others having this issue:

For others having this issue:

I hacked a way to make

Thanks, salodh and mohanak

WPAIE not found and required