I have a pair of 7004 ,(2)5548up, (2)6001 and some 2k , whats the best practice to build a dc jnfrastructure with whats in handNo UCS , Some blade servers will be running esx5.1 in the dc along with some appliances whi h will go to 2KsWhere to use vp...
are you sure your subnet is classful? interface gigabitethernet0 ip address 10.0.0.99 255.0.0.0you have to match the subnet with your isp router.i d use /24 instead of /8 on both devicesyeah with NLR , i mean configure interface IP addre...
Negative you re prioritizing thst traffic kf there is a congestionAs explained above if there is enough bw 4mb will be usedYiu need to jse police command rsther than prioritySent from Cisco Technical Support Android App
Firs tconfigure nlr (network layer reachibility)From cisco to isp routerAnd cisco to your desktopThen create dhcp pool and with gw , dnsThen nat the pool as described on cisco or isp routerMake sure isp router reaches to your desktop and vice versa o...
Hi AjayThanks for your response, I actually completed the projectI used non blade servers to go to 2k ->6k(l2) ->7k (l3 SVI)And Blade servers to go to 5k-> 7k(l3 SVI)It's all about VPC , I wish i could play with fabric path as well but didn...
