Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Can somebody please guide me through the process of upgrading Cisco 1252 access point from Autonomous to Light Weight iam attaching show version log which gives information about current IOS on the access point & its in standalone mode now.Any...
Hi Guys, we have Cisco 3750-12S-E switch and have configures tunnel interfaces on it for point to point connection. Now the minute i enable IP ROUTING on the switch my tunnel interface goes down and i lose end to end connectivity.
hi guys,caught in a strange senario where in ISDN connection works fine for sometime and then once the call is terminated it doesn't come up automatically next time. I have to force the bri interface to reset The problem seems to be at layer - 2 whic...
Hi Guys,I came across this strange scenario where in the Cisco Switch 3560 does not boot automatically after reset or reload but when i force to switch to go to password recovery mode i mean Switch: mode and give boot command then the switch boots fi...
thanks for replying guys, just a small clarification i dont want to define default route pointitng to the other end of the tunnel rather i want to define networks something like this ip route 192.168.1.0 255.255.255.0 tunnel 1to be precise specific...
