Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi:I have a Cisco WS-C2960S-48TD-L with 12.2(55)SE2.This is a standalone switch, not in stack, and with no order it reboots itself looking for a new master election. On logging i have nothing, but connected with console cable i see the following afte...
HI,I have a server whith a cd1 second edition and a campus manager 3.0, Severals switches and routers from my network are not recogniced for campus manager aplication, I notice that ani server do not support this machines. Is possible to update the...
Hi,I,m triing to boot manually the msfc2 with the procedure: "how to recover a missing msfc from the supervisor,s show module command" from cisco .In step 10, when i issue the set command the display is :rommon 1 > setPS1=rommon ! >boot=bootldr=?=0bu...
Hola Adrian. Yo estoy con una situación muy similar a la tuya. La diferencia es que en vez de ser una VPN en el extremo de fuera es una punto a punto.Misma situación, tengo unas cuantas redes dentro de la red 10.0.0.0/8 que me coinciden con otras igu...
Thank you so much for your help. Finnally it´s a problem with the hardware. I put the switch on my desk for upload the IOS and i´ve seen that the switch it´s powering off and on.It´s under guaarantee so, hell yeah!!!
The switch hasn´t a stacking module.I have no smartnet but i can download a new IOS and i´m going to prove it.Many thabnks for your help. I´ll update the case with more infoKind regards