Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a pair of Nexus 93180YC-EX Switches which require Netflow to be enabled/configured. The default NX-OS OS the Switches came with did not even support Netflow. We've upgraded to 7.0.3.I7.2 version. So Netflow is supported and the feature is enab...
Hello guys, I am not even sure this will work but let me give it a try. I have a client that wants me to bring up 2 VPN tunnels from my company to 2 Data Centers of the client – meaning 2 parallel Tunnel between us and the client. So over both Tunnel...
Hello guys, I need to redistribute BGP into EIGRP and vise versa. I did it in my lab and seems like I am seeing EIGRP routes in the BGP table but I don’t see BGP routes in my EIGRP table.Can anybody provide some info about that kind of redistributio...
Hello guys,I have 4 locations across the world connected to an MPLS cloud (2851 CE routers connected to my Core switches running OSPF) speaking BGP to PE routers. I am redistributing OSPF into BGP and vise versa on my CEs to get all routes from locat...
Hello guys,I built a Site to Site VPN Tunnel between two of the comapny remote locations with ASA5505s. The speed of the Internet on my site is 6 Mbps, on the other site - 50 Mbps. Two servers are connected on inside interfaces on the ASAs on both si...
Hi yes, I’ve seen the prereqs:
hardware access-list tcam region ing-netflow size
As I said in my initial description the command is not available in the CLI. I have reviewed both docs last night but could not find the right answer for my case.
Y...
So, that was the problem. I cleared the configs and started from scratch. What I was missing is default-metrin under router eigrp x.Thank you very much!rvr
