About karamalomari

karamalomari · 06-01-2023

I am trying to configure an automated backup of the configuration on a daily basis from various cisco devices.I have tried the KRON & archive methods without any luck.Is there any valid document on this subject with examples?Switch# config tSwitch(co...

karamalomari · 06-01-2023

class-map global-classmatch access-list global_mpcclass-map outside_policy1match access-list outside_policyclass-map class_sip_tcpmatch port tcp eq sipclass-map outside_policymatch access-list outside_policyclass-map testing!policy-map type inspect h...

karamalomari · 03-08-2023

I have multiple Layer 3 SVI configured on the core switch and all of them are configured with ip helper-address command which by default enables ip forward-protocol . Now we have a requirement to add ip forward-protocol udp PORT# command. when using ...

karamalomari · 02-02-2023

I have a question regarding OSPF point-multipoint non-broadcast setup. The links between Hub's & spokes are private links. attached is the drawing with configuration files of Site-A with wan router-FW-Core Switch & Site-B with wan router-core switch....

karamalomari · 01-03-2023

class-map global-classmatch access-list global_mpcclass-map outside_policy1match access-list outside_policyclass-map class_sip_tcpmatch port tcp eq sipclass-map outside_policymatch access-list outside_policyclass-map testing!policy-map type inspect h...

karamalomari · 06-05-2023

the issue is with the SFTP connection with the server.it is displaying the following error:%SSH-3-NO_MATCH: No matching kex algorithm found: client diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1 server curve25519-sha256,curve25519-sha...

karamalomari · 06-04-2023

In my scenario i dont have specific phone number or extension (as mentioned in the regex command) to match.All traffic towards data center is passing through outside interface and want to keep default policy-map applied with excluding traffic going t...

karamalomari · 06-04-2023

if i apply this to the outside interface this will impact video calls which requires h323 inspect.The outside interface is the entry point to "All data center servers/services".So how can apply the default policy-map to all the traffic except the the...

karamalomari · 02-16-2023

Thank you David for the information shared and support.Point is clear now.I really appreciate your help & support.

karamalomari · 02-15-2023

Hi David,Kindly find below the configuration from both Hub's:Hub-01======interface G0/0ip address 192.253.100.1 255.255.255.0ip ospf authentication message-digestip ospf message-digest-key 1 md5 0 pass OSPF@1234ip ospf network point-to-multipointload...

Member Since	‎06-23-2007 10:10 PM
Date Last Visited	‎06-04-2023 08:57 PM
Posts	93
Total Helpful Votes Received	18

User Statistics

User Activity

Automatic Backup using SFTP

ASA Global Inspect Policy

Impact of applying ip forward-protocol udp port#

Show IP Route in HUB-Spoke setup

ASA 9.6 Global Inspect Policy

Re: Automatic Backup using SFTP

Re: ASA Global Inspect Policy

Re: ASA Global Inspect Policy

Re: Show IP Route in HUB-Spoke setup

Re: Show IP Route in HUB-Spoke setup