Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,I am having an issue with static NAT on an old PIX.I have a static in place from outside, inside correctly conifgured with an external host on the outside translated to an internal address on the inside.static (inside,outside) 10.x.x.156 194....
Hi Guys,We have recently deployed the above model line cards to replace our old WS-X4248-RJ45V cards.Now we are facing a strange issue, whereby some ports/phones work on the new cards and others don't. However all phones work on the old cards.All the...
Hi Guys,When using EZVPN IOS client, is there a way to force it to use NAT-T??I know it automatically uses NAT-T if it detects NAT in the network, however can you force it to use NAT-T even without a NAT??CheersScott
Hi guys,It has been a while since I used the CSM and I am getting a little confused with NAT I am wanting to create a loadbalanced VIP so Servers on subnet A can access LB to 2 others servers on Subnet A. Now obviously i need to do some Source nat to...
Hi Guys,I have an issue whereby I cant seem to get multicast to stream outside a vrf.I have the following scenerio;6500 switch, sup-720 loopback set as the rp.I have created a vrf (lite), which is sat behind a fwsm. I have enabled multicast routing i...
Hi Guys,I am running Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.03.00.SG RELEASE SOFTWARE.It would appear I indeed do require the 4200 PS, however why will it not power phones when it s...
Hi Rizwan,I tried that command, however this is on automatically in 12.4T code, hence it is still using the auto detect feature rather than forcing NAT-T.Cheers
Hi Guys,I have now sorted this To get it working I had to enable nat server and also add the vlan id to the Vserver config.So my final config is;natpool SUM-SVR 172.30.60.x 172.30.60.x netmask 255.255.255.0real svr1 address 172.30.63.x no inservic...
Hi Daniel,Still no joy, I can ping the VIP, I can telnet to the servers on port 8081 direct. I see the VIP taking traffic and it says it is forwarding out to a server i.e in the counters however I never see the packet arrive at the server???Strange...
