About slauwers

slauwers · 10-19-2007

Hi All,I'm having an issue with about 10% of my ougoing calls with Q931 issuing a release_complete message right after I send a SETUP message. Cause code is 0x80A2: no circuit/channel available. Checking with show idsn status I can see that there are...

slauwers · 06-02-2005

Hi Dave,Yep, that's your problem. I mentionned 384 Kbps because of the 320Kbps video + 64 Kbps voice (typical environment). So I'm afraid that with your Tandberg you will have to stick to the smaller screen (or change your PC's screen resolution to a...

slauwers · 06-02-2005

Greg,I don't know if you figured it out already but here's a suggestion. You probably encode your call over the WAN for G.729. By default Callmanager doesn't support G.729 for MOH. Go to service parameters and pick the Audio Translator option and cli...

slauwers · 06-02-2005

Changing the size of the screen changes the bandwidth requirements (you need a lot more bandwidth). Are you using a H.323 gatekeeper to do bandwidth management or are you using some other agent to control the streams (callmanager?). Typically configs...

slauwers · 07-31-2003

Have a look at the following pages. It will tell you how to do it :Tools to change Cisco LOGO on ip phone:http://www.cisco.com/cgi-bin/tablebuild.pl/ip_phone_clientHow to do it :http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/i...

slauwers · 07-29-2003

Hi Milton,It's been a while so I don't know if you had a response to your query but if not :You still need the PGW (PSTN Gateway) as the SLT onlydeals with the overhead of empty SS7 packets and the PGW does the actual protocol translation.Hope this h...

Member Since	‎10-16-2002 06:02 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	9
Total Helpful Votes Received	10

User Statistics

User Activity

intermittend E1 ISDN PRI outcalling issue

Re: Full Screen Video Decreases the FPS

Re: Multicast MOH Across WAN

Re: Full Screen Video Decreases the FPS

Re: ITS - 7912 Cisco Logo

Re: SS7 Signaling