Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Gents we have four switches which are connected in the ring. Switch 1 connects to switch 2, switch 2 connects to switch 3 and switch 3 connects to switch 4. They all are trunks
I want to run HSRP between switch one and switch 2 . Will make switch 1...
Gents we have a stack of two Cisco 3750G . It has few port channel Can someone please tell me how much i can have the max number of port channels. What is recommended. This switch is acting as core switch at the moment. Currently it has i or two la...
Gents we he default class map
ans policy configured for Cisco phone and voice my question is do we need to add hold-queue command on router in interface which connects to core switch and core switch interface which connects to router ?
Hi Guys we have following configuration in our devices
aaa authentication login default group tacacs+ enableaaa authentication enable default group tacacs+ enableaaa authorization consoleaaa authorization exec default group tacacs+ if-authenticated...
We have a datcentre A and B and each datacentre is connected with a single WAN router. BGP is configured on both WAN router with service provider. OSPF is configured between router and both data centres. We want that traffic originate from datace...
So do I have to do any configuration on console ? Or if I have enable password I will be able to console it ? Do I have to remove any configuration as it says Aaa console as well
But how that l3 connectivity is done and do I have to update anything on the wlc abt the user or ap vlan for the discussion sake if at the site my ap and user vlan subnet is changing do I have to update anything on wlc ?
