Can anyonbe help me with this...on a cisco router you can configure it to attempt to authenticate against the ACS server, and fail over to the local password.I want to set up the same on a PIX firewall, but can find no way to get it to use a local pa...

Recently planned to tunnel from a new multilayer switch, over the wan to another router. Configured the tunnel fine, but when it cam eto rouring through the tunnel all fails. Substituted in a dual ethernet router with same tunnel configuration and it...

Can anyone shed some light on a little problem i had...We have two differnt WAN's in my company. in one particular building, traffic in one subnet is sent over the SMDS network, and traffic in the other is sent over the IP Clear network. This is a le...

I have a 3750G configured with autoQoS. i have then set up a number of ports for the requirments of the project. Of concern are two ports, both configured not to trust and to override the cos value with the default port cos value that i have set at 5...

i am a new user to CiscoWorks, so excuse my lack of knowledge. I am testing out netconfig with a test device. i created a new job from the template to change the enable secret password, and copy running to start. when i try and click finnish at the l...