Here is the setup:I have two sites: LAN1 is connected to LAN2 by 2611XM on each side and both router connected to each other with two WIC Point to Point T1.I like to know what is the best way to load balance trafic between two sites. - Jayesh
I had snmp-server chassis id configured on Catalyst 3500XL switches. I changed chassis ID and it does not show in running or strartup configuration any more. It disappeared. Is any one know what could be the reason.Thanks
VPN 3000 Idle time out set to 30 minutes, still users can not disconnect at idle time out.I am running version 4.0.Any suggestion why?Regards,Jayesh Bhakta
I am using RME 3.5 on W2K Professional. I have configured email automatic action but it generates error=193 in SyslogAnalysis log file. Does not send email.Any idea how i can fix this.Regards,Jayesh Bhakta
I am trying to configure syslog on linux, I started syslogd with -r but i am not able to receive log from PIX.I configured pix to send message to IP of linux box.Like to know how i can recieve message to syslog server running on linux.RegardJayesh
Daniel,I have configured router as follow. Let me know if it should work or any change need to be made.Router A:!ip cef!interface FastEthernet0/0 description "Interface to LA LAN" ip address 172.15.3.1 255.255.0.0 speed 100 full-duplex!interface Seri...
Do I need to add static route for destination LAN?LAN1 and LAN2 are connected with routers on both side. I am using EIGRP and IP CEF is enabled.ThanksJayesh