Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just wondering if anyone has used this service within the Middle east region. If so, how are people satisfying local restriction with regards to restricting access to websites?For instance, in UAE, Egypt and Oman, the local government have restrictio...
Seems like the Cisco Multicast Command reference guide has gone missing.here's the page for the 15.3 version.http://www.cisco.com/c/en/us/support/ios-nx-os-software/ios-15-3m-t/products-installation-and-configuration-guides-list.htmlI've tried all th...
Hi Guys,Just doing some studying on multicast and having abit of trouble.I've lab-ed it up in GNS3 as the following:R2 acts as a hub and connects to three routers R1, R3, and R4I'm running OSPF on the network, with R1 and R2 being in the Area 0 and R...
Jon,/32, they'll accept but they most likely won't be sending that out to the rest of the internet (thats just crazy) ... but /24, i don's see why not ... however like Marwan says, its all down to the ISP's policies aswell as the policies between the...
not so relevant anymore as you will be doing the PBR on the router and not the switch. But if you did decide to upgrade the IOS on the switch and do the PBR there, then you would also need to change the sdm prefer to routing. The default SDM prefer o...
it can be done on a 3750Metro: http://www.cisco.com/en/US/docs/switches/metro/catalyst3750m/software/release/12.1_14_ax/configuration/guide/swtunnel.html#wp1021922do a search for VLAN mapping or VLAN translation.cheers,Nhat
run "sh processes cpu sorted"this will tell you exactly what is using up the cpu.agree with Leo about the next hop matches ... not needed. The Nat-ing gets done on the outgoing interface.i'd also recommend moving your NAT onto the 4 routers ...
not too sure if i'm over complicating things (i think its simpler) however:just configure vrf-lite, and assign each pair of WAN/LAN interface to a vrf ... then just configure in each vrf what you would normally do if the 2951 had one WAN interface an...
