Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have a problem similar to https://supportforums.cisco.com/message/3103915:We use passwords with special chars, worked fine with fw 1.0.1.I want to re-commission the switch, so before that, I upgraded to the latest firmware, 2.0.0.10. Since t...
Okay, got it!On Building 3, remove the 1U (untagged) vlans from ports g2-g4, and assign the untagged vlan ID as PVID on those ports. Like:g2: untagged 30, PVID 30g3: untagged 130, PVID 130g4: untagged 133, PVID 133.It should work like this.Cheers,Tam...
The SD216 is an unmanaged switch, so there's no way to block the ports fromsoftware.What you could possibly do:block the ports physically: stuff something in the unused ports, like vax or something. This will void your warranty, though.if you have a ...
Hi,Same problem here. Both with old (1.something) and new 2.0.0.10 firmware, the SLM does not support any time server protocol (NTP, SNTP, daytime, anything). Another feature request to Cisco on the Linksys series switches...Can be a pain in the arse...
