About joe19366

joe19366 · 08-24-2024

we are setting up duo ad sync to an on premise domainduo proxy client installedduo ad sync configuredduo ad sync says connectedwe are now sitting here unable to continue becuase duo is waiting for the initial sync(per the documentation)"Duo's directo...

joe19366 · 11-27-2017

We are using a Nexus 3172PQ 10gig switch. we have a multicast feeding coming in on port Eth1/35 which is an access point in vlan 123. we need the multicast feed to get to ports Eth1/11 and others, but for now just Eth1/11 the mutlicast feed is ...

joe19366 · 11-11-2017

with all the people working at cisco how does this happen??? unreal. does anyone there do anything? Loading disk0:/asa924-24-smp-k8.bin... Booting...Platform ASA5525 Loading...IO memory blocks requested from bigphys 32bit: 55084ÿdosfsck 2.11, 12...

joe19366 · 04-11-2017

we are looking to span ALL our production vlans to 3 destination span sessions at the same time on a nexus 9300 but, a limitation of platform seems to be A VLAN can be part of only one session when it is used as a SPAN source or filter. this is a m...

joe19366 · 05-13-2015

Good day, Here is the issue we are trying to solve - Switching firewall devices, going to need to have same servers reply to two different firewalls; the servers have always been behind their ASA and replying to the internet for the global Source IPv...

joe19366 · 08-24-2024

thanks i spent time setting up a new domain in azure and signed up for a duo trialit all works instantly there with the same settings i have used beforethanks - this one on prem domain must be corrupt even though we were installing the duo proxy on t...

joe19366 · 08-24-2024

"So you are probably missing a configuration step."definitely not - i just built a new domain on azure and setup a duo trial account and it worked instantly like you described.i didn't know there are things on AD can that can break it... must be a co...

joe19366 · 11-10-2023

c'est magnifique!

joe19366 · 11-23-2019

Problem: Authenticated users to the nexus default to only "vdc-operator" role and lack permissions. The problem occurs because the default ISE tacacs profile for tacacs logins lacks the nexus role(s) attribute. 1) If you are having this issue you hav...

joe19366 · 10-11-2015

Hi there, Sounds like you have a device connected to the network that is fwd traffic up and down a single port, and or a cable from your cisco switch back to itself. first, NEVER run "spanning-tree bpdufilter enable" when you have a loop. your likely...

Member Since	‎02-12-2007 08:50 AM
Date Last Visited	‎08-22-2024 02:01 AM
Posts	132
Total Helpful Votes Received	73

User Statistics

User Activity

Duo AD Sync unacceptable 12 hour initial sync

Nexus 3172PQ igmp snooping OFF Globally and still no multicast traffic intra-vlan

ASA 5525-x Crashes with weird output upon boot up.

Nexus 9300 switch vlan only source of 1 span session

ASA Hide nat while using inside,outside static nat

Re: Duo AD Sync unacceptable 12 hour initial sync

Re: Duo AD Sync unacceptable 12 hour initial sync

Re: OSPF Routing Protocol 20 Advanced Questions

Re: ISE inegration with Nexus 9000

Hi there, Sounds like you