Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I want to use WRED with MQC on 12000 but there is no mpls/exp-bits statment on the "random-detect" command.I found this note at cisco documentation:Note: The legacy CLI also uses the precedence syntax for Multiprotocol Label Switching (MPLS) traffic....
Hi,I have AS5350 with two PRI's and 60NP.the dialing end is using HDLC encapsulation.although the modems are connecting fine, the HDLC handshake is not done and the connection fail.what is the problem? and how can I use HDLC encapsulation on the asyn...
Hi,I'm using different source-ip under two vpdn-groups, and try to open an L2TP tunnel from my XP to 1.1.1.1 and 2.2.2.2:vpdn enable!vpdn-group 1accept-dialin protocol l2tp virtual-template 1 source-ip 1.1.1.1 no l2tp tunnel authentication!vpdn-gr...
I have this configuration on 7600 router: line vty 0 4 transport input lat pad mop telnet rlogin udptn nasi ssh acercon!endam trying to find out what is the acercon means.can anyone please help me with that.
Hi,The default configuration on CMTS is "cable upstream hopping optimized" and it could change manually to "cable upstream hopping blind".I need to know what it mean "optimized" and to be more specific: how the CMTS select the frequency to work on af...
Hi Ankur,thenks for the replay.I'm familiar with the "transport input" command and its uses, my question is what is the "acercon" stand for? is it a protocol? like telnet and ssh? do you have any link for this?thanks.
