Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In a trunked topology with an (HP)ArubaOS-switch together with two C3750 switches connected in a triangle and a mismatched native VLAN setup between the ArubaOS (untagged 10) on one hand and the Cisco's on the other hand (ntaive 1).
One of the Cisco ...
I've done a factory reset (> 5 sec. push on factory reset button) on an MR-52 AP, but it's not broadcasting any of the default SSID's described here.The AP 's status LED is cycling through rainbow like colors and also blinking orange in between the c...
Is there a way to automatically change the port state (SLM 2008 switch) from enabled/100MB/1000MB to the disabled state?The setting change must occur on certain times of the day.Or, if possible, based on port statistics (number of Mbytes sent/receiv...
Example of question:For what reason can't network id's 192.168.1.32/28 and 192.168.1.32/29 not be on one internetwork connected by routers able to route classless?
I want to query a callmanager for data such as number, name, pickup group membership, call forwarding settings.I prefer reading the database in MS access.For safety reasons I want to make a copy of the database before opening the database.Which part ...
With the setup as pictured in the attachment.Why is one of the C3750-switches going into PVID_Inc state and the other one not.Meanwhile in a Lab setup I 'm able to reproduce the issue with different equipment.
Being a single HP-Aruba-2530 connected ...
The AP was replaced by Meraki through a case in the Meraki dashboard.As described there was one issue with the AP, it was not accessible using the local status page nor SSID's after factory reset.But there was no issue with setting a fixed IP address...
Yes, the led lights indeed do go off after 5 seconds, together with the NIC activity led right beside the network port on the AP.When pressing the reset button, the AP's status led is blinking green for about 5 seconds.After the AP's reboot , after t...
