Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone know approximately how much disk space is required for backing up DNAC? Both Automation and Assurance.
The admin guide details server requirements but mentions nothing about disk space itself.
https://www.cisco.com/c/en/us/td/docs/clo...
When deploying a single EasyQoS policy to a scope that includes both 3650 and 4500 series switches in APIC-EM, there's an inconsistency with the CLI deployed. The Multimedia Conferencing class is missing from all 3650 devices, however is present on 4...
Has anyone come across the issue where no devices are visible in the device inventory?After successfully discovering devices, when clicking on the device inventory icon, indicator "Loading Device Inventory..." persists and no devices are listed. Addi...
No problem. Ok so fibre connection
successfully tested a 2960 at Gig with a 1000base LX SFP to the FW
unsuccessfully tested the IEM switch at 100 with a 100base FX SFP to the FW
The issue may be that you have two completely different transceivers...
Hi Waterbird
There's a pretty clear and concise response to this confusing area in the two solutions on this previous thread.
https://community.cisco.com/t5/switching/pvst-rstp-and-rapid-pvst/td-p/1459012
Hope this helps
Hi
To summarise then
- the Checkpoint firewall port is Gigabit ethernet capable, configured as speed 100.
- the IE-3000-8TC-E port is 10/100 capable. You have tried speed auto and 100, but are having issues.
It's not clear whether you are connectin...
Hi
You can switch between the fixed rj45 and sfp using the interface level command
media-type sfp
and
media-type rj45
Hope this helps. Please rate helpful posts.
So with the restrictions you've stated, then you have a working solution for CUSTA-LAB routing via CUSTA-RTR1 towards 192.168.1.0/24 under normal operation. Under failure of CUSTA-RTR1 you're using static routes and IP SLA to route via CUSTA-RTR2 to ...
