Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have, say, 3 locations, Tokyo (R1), New York (R2) and Sydney (R3) and for this scenario, all are connected via serial, and I am running VLANs at all locations. There is a VLAN named accounting and there is one member at 10.0.1.2/128 on the S...
Hi All,I have 3 routers within Boson Sim. PIR1, PIR2 and PIR3. Serial 0/0 on PIR1 has an IP 195.10.1.2/30 and PIR2 serial 0/0 195.10.1.3/30. PIR2 also has an IP 195.10.1.5/25 on the fastethernet 0/0 and PIR3 has an IP 195.10.1.6/25. All have been con...
Hi All,swithes A and B are seperated by a router. 3 hosts attachred to each switch. This = 6 seperate collision domains and 2 broadcast domains, yes? Cheers.coolboarderguy...
Hi All,anyone in here interested in VoIP Skype study/tech sessions? I'm currently playing with CallManagerExpress3.4 and learning how to set up SIP to SIP and would love to chat with others in this area. Feel free to contact me @ coolboarderguy@gmail...
Hi All,how recent is the 7960 IP Phone? I found this eTutorial,http://www.cisco.com/warp/public/779/largeent/avvid/products/7960/7960_topic2.htmas I had an interview for a Voice Helpdesk position today. Not too old is it? Cheers.coolboarderguy...
Hi All,ok, what's being said here, is, you can define larger subnet ranges and then break it down into smaller ones, IP/25 and then IP/30, but not IP/30 and then IP/25, yes? Cheers.coolboardeguy
Hi All,obviously I'm doing something fundamentally wrong here? Cheers.Gateway of last resort is not set 195.10.1.0/25 is subnetted, 1 subnetsC 195.10.1.0 is directly connected, FastEthernet0/0coolboarerguy
