Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am migrating nearly 1,200 device (configured as users) from ACS 4.2 to ISE 2.6. Within ACS 4.2 they are assigned a WAN address from a locally configured IP Pool. THere doesn't appear to be such a solution with ISE 2.6. I'm hoping to use our centra...
Greetings,
I have a configuration as per the attached diagram that has fibre distances of approx 20km.
Initially we configured a Layer 3 core between Data Centres using dark fibre and DWDM optics, and this has been working for several months.
To fa...
Greetings,
I am in the process of standing up a new Data Centre and having an issue with configuring VPC between 2 Nexus 9372 switches.
I will only have Nexus kit in the DC (Nexus 9K and Nexus 2248 FEX), and from what I can see you need to have a k...
Greetings,
I have a pair of ASA5510's that are used to terminate IPSec LAN-LAN VPN's (active-standby) using static routing. I have a trading partner who wants to have a primary and a failover VPN (he has 2 different endpoints) so I understand I wil...
Greetings,
Work has upgraded my laptop and I need to transfer everything from my old one.
Q: Does anyone know how I can transfer my ASDM configuration so I don't have to recreate all the devices I manage?
Thanks.
Thanks for the responses. I'm a little confused (easily done) regarding the use of IP Pools on ISE then. The user request is basically a proxied RADIUS connection (Telstra is the ISP being used). Originally we were using ACS 4.2, which made it easy....
Christian,These are carrier connected mobile (4G) devices and they are RADIUS authenticated. They connect to a private APN and autneiticate to a RADIUS proxy within the carrier which then strips off the realm (user@domain) and forwards the RADIUS re...
The above is very helpful, but...
Is there a way to clear a config for all previous settings for a particular config item?
ie.
To set a new syslog server I would enter logging server 10.x.x.y, but how can I remove previous settings if they are not...
Walter,
Thanks for the reply.
No, we aren't compliant (and I accept that).What I'm curious about is why same optics (different wavelength) work but configuring the switchport as a Layer 2 trunk doesn't.
The distance is well within the power budget ...
