Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,My ASA is a simple setup with a dmz, customer don’t have a dns server in the insidenetwork. So I use dns doctoring to access the web server in the dmz withpublic address.static (dmz,inside) 11x.x.xx.ccc 192.168.x.x netmask 255.255.255.255 dnsIf I ...
Hi, I have a hub and spoke VPN network, and all traffic is from remote office to datacenter,I have a request to build a tunnel between two remote offices to be able to access some servers between two remote offices,Can I just change the interesting t...
Hi, I have a network with a Juniper SSL box, which connect to ASA5510 DMZ port, wher outside of the ASA is same as the outside of the SSL vpn box.Accessing the internal network hav eno issues at all.Now I need remote users SSL VPN to Juniper box and...
Hi,I have to integrte two customers networksafter a take over, but both networks are with overlapping IP address range, bothnetworks like to talk to each other for resource sharing while maintaining same IP addressing for some time.And they need to u...
HiI am troubleshooting a STP looping issue with a iSCSI SAN environment, many servers in theserver farm share the SAN through both SAN side switches (see the diagram attached), I am a cisco guy and these SAN side switches are Procurve, but all flat l...
HI, Thanks Mike, it worksbut I had to make itaccess-list pnat3 permit ip host 192.168.x.x host 11.x.x.xstatic (dmz,inside) 11.x.x.x access-list pnat3and I didn't need the other static, once dns doctoring removed private address access works and with...
Thanks Federico, My hub and spokes are routers(cisco), means I have to add traffic to interesting traffic ACLs and allow fraffic thr firewall isnt it.Do I have to pay attension to routing of the traffic between spoke sites through hub point.Cheers
Thanks Halijenn, That is exactly what I did, but, without NAT exemption. My site to site IPSec tunnel is between two routers, so do I need to exempt NAting for SSL pool in the ASARegards
