Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have two WLC5520's configured in a HA redundancy pair (connected via RP). On the primary and secondary controllers it appears redundancy is working correctly via the following commands:
Primary:
(WLC-SE-1) >show redundancy summary Redu...
Since implementing Cisco Prime 3.0 late last week, we've noticed some strange behavior. First off, we see the prime server log into all the devices via ssh multiple times throughout the day (as indicated via the screenshot below).
The 22:00 appears ...
Hi All!
We are currently planning a Cisco Prime installation in an effort to replace a sprawl of tools currently. One of the crucial pieces of our environment is syslog, and even though we are a small shop, we currently generate roughly 22million log...
Hi all, This last week I was handed an ISR G2 licensed with CUBE and was told it was part of a proof of concept to centralize all the various communication circuits (connected to distributed IP-PBX's) through a cental point using SIP. While I don't d...
Good Morning folks! We are re-evaluating our current VPN infrastructure and are trying to implement a "seamless" user experiece (with Windows 7). In my current testing I have implemented "SBL" but the process isn't seamless, the user still needs to l...
Just to update, it's actually ~52million. It's true we are seeing 80% of these logs being generated from two ASA's and 94% of the log severity is Level6 - Informational. Being a government agency in oil/gas, we do have some regulatory and compliance ...
Thanks Tim. I am going to have to investigate more, as I am wondering if the authentication piece is actually a requirement for the other systems (as I know it won't be for the distributed UCME systems). Sent from Cisco Technical Support iPhone App
Thanks! The issue did exist in the Dymanic policies. I set them all to unchanged, and that resolved the issue (well that part of the issue anyway ). I appreciate all the help!!
We technically have 4 licenses due to rollup of our A/S pair. I have defined the GROUP POLICY previously similar to your instructions, as well as the CONNECTION PROFILE. However, it still seems that as soon as I enable the AnyConnect VPN Client acces...
Ok, So this may sound like a really silly question. We currently are using the default license shipped with the device, as we wanted to confirm functionality prior to going out and purchasing a tonne of SSL VPN licenses. Will this impact what I am tr...
