Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have 1x Cisco 6509 with Sup2 and MSFC2 and it is running on IOS (c6k222-jk9sv-mz.122-17d.SXB11).I have following policy map : Policy Map VOIP Class IPPHONE priority percent 75and the following command on each interface: service-policy ou...
Hi,I need to have a IDS/IPS for my local users in my network. we have 3xcisco 6509 in access layer switch with 4 VLANS and I am looking for a system to detect activities like Port scan, IP scan and ,... in local network from the workstations.Please a...
Hi,I have a Cisco 3560 48PS (IOS 15.0-1.SE2) and I need to have followin configuration:Policy-map VOIP_POLICY class VOIP priority percent 75I already created VOIP class and VOIP_POLICY but when I go to policy-map setting to type priority...
Hi,I need to upgrade 2xsup2 module to 2xsup32 on my cisco 6509. I just found out that I can not have the CISCO WS-X6500-SFM(Cisco Switch Fabric Module switch) with Sup32 and I have to remove 2 xCISCO WS-X6500-SFM2 modules from the switch.I am using t...
Hi,Right now we have Cisco 6509 as a access switch in our network. Each user has an IP phone and a computer. we are going to implement 802.1X for end users by next month. I need to check all the users activity in the network like if someone plug an a...
Can I use following command instead of priority and bandwidth?wrr-queue bandwidth wrr-queue queue-limit Can I set them just for VOIP traffic (specific ports, IP or traffic)Thanks
if I go with IPS mode and connect switch uplinks to the IPS then I can not monitor local VLAN traffic on each switch. becuse I do not have Core switch in the network and each vlan traffic will stay on the switches and will not pass the uplinks.
