Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 2811 router with IP Inspect enable for Ingress traffic but it is quite generic:ip inspect name firewall tcpip inspect name firewall udpip inspect name firewall icmpip inspect name firewall dnsint Serial1/1ip inspect firewall out Inspection n...
We have multiple 65xx's that I'd like to setup for Smart Call Home. All the 65xx's have private IP's on the loopback interfaces, so I installed the CTG software on a machine with a public address. So do I configure all the devices to point to the C...
On the TACACS+ Administration Report, there is a reason column. Does anyone know how I would use this?I'm looking for a solution to this problem. We have multiple scripts that log into our routers for various reasons. Instead of having to create 7...
I am using a Cisco ACS server with an RSA server behind it. When the user is authenticated from the ACS server, I want them to go straight into enable mode, not have to type the enable mode password. What line am I missing?aaa authentication login ...
Wondering how everyone else tests their ISDN redundant network? Does anyone automate or schedule tests of your Redundant network to make sure all routes will route probably in case of a primary link failure? How often do you test? And can you do t...
It looks like I can only do that command for specific protocols though, not for a TCP or UDP port not already defined (like H323), or the entire TCP or UDP port realm.
That is the setup, indeed. But it does work.Other issue I found was that the documentation for the AAA commands you need to allow doesn't include the enable command, but it seems the script behind "call-home send alert-group inventory profile XXX" t...
What happens when I issue that command but the redundant supervisor is in "Cold" mode? I'm looking for the shortest downtime when upgrading code on a 65xx switch with dual sup720's? I loaded the new code on the slavedisk0:, and do a "hw-module mod ...
The configuration in question is for telnet, but I do need to design my new console access connection. Console access would be either remotely or on-site, but I don't feel comfortable giving priv 15 right into it. I plan to use the same authenticat...
