Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This doc states 4. Has there been any change to allow more? http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/qa_c67-722110.html
My customer purchased these thinking they supported netflow. However the configs aren't accepted. Does this NM support netflow or do they need the SM ?
Thanks.. did a little more digging.Its up to 9 now. http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/release_notes/OL_30562_01.html
My apologies. I may have added to the confusion. So if you are using a L2L from ASA to ASA, then you will need to configure both ASAs with policy nats so that each nats their local source when going to the peer ASA. So for example, you have someth...
Correct. You will need to create another/fake subnet that the headend router will see. Otherwise the headend would probably delete the current tunnel when the other connects.
On the second ASA you can configure a policy-nat for traffic that should traverse the VPN to avoid the overlap. Here are a couple exampleshttp://www.cisco.com/en/US/docs/security/asa/asa72/asdm52/user/guide/nat.html#wp1053751http://www.cisco.com/en/...
