Hi, does anyone know if this is possible on Cisco?If so, can the Portal detect browser language and provide the user login interface based on the browse language setting?
Hi all, figured I would ask here since im no Cisco routing engineer especially with Nexus and NX-OS. so seeing some weird things in OSPF more so for what seems to be discrepancies between 2 HSRP 5548's running OSPF.OSPF summary is not identical. SW1:...
Hi All,
i made the mistake of typing "sh" on the port channel (used to do "sh" as a short command for SHOW on HP but this is actually SHUTDOWN on Cisco.)
so after I did the "no shut" to bring the port-channel back up, it would not come back.
BTW,...
Hi all, I'm not that well versed in cisco VPN and I'm having a problem. I need to access remote users system for troubleshouting and I cannot ping or access anything on their laptop when they are connected to VPN. For example, a user would get an IP ...
Hi all, I'm wondering if this is even possible. I need to route a subnet from a 7204 to 2 different gateway's which are not Cisco based. I cannot use HSRP, GLBP or VRRP as the other 2 gateways don't support theses protocols. Yet they do support OSP...
anyone know why my OSPF is not initializing? Am I missing a configuration? Im doing this in EVE-NG and putting a standard router at the place of the NX-OS 7000 seems to work... any help would be appreciated.
ok so I have created a lab and i cant seem to get OSPF to start. See diagram and attached commands.The backbone area says inactive and not sure why. This is nx-os latest virl.Capture22.png is the diagram, others are command outputs.
i remember seeing that the LACP partner was not there. I forget the rest. What I could not figure out is why am I not seeing anything in LOGS that would tell me what is wrong?
The other thing I noticed yesterday while adding a new VLAN to the Po, i...