Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 1100 series AP on my LAN. I have a 2511 access server on the other side of my house that is isolated from my LAN. I want to connect the 2511's ethernet port to a 350 AP in hopes that I can now access the 2511 from my LAN.I am guessing that i...
Hello,I read that I might need to upgrade my ROM in order for my router to support 16 Megs of flash. My router currently has 8 flash/16 dram. I am looking for an IOS image that will support the technologies I will encounter on the BSCI test. At the v...
Hello,I am trying to upgrade some 1601, 1601-R and 1605-R routers to 12.3(6) IP PLUS. I am having a hard time figuring out if this image will run on these models. All routers will have 16 Megs DRAM minimum. If anyone can confirm this image will work ...
Hello,According to this page...http://www.cisco.com/en/US/products/hw/routers/ps341/products_tech_note09186a00800a7515.shtmlthe flash on a 1600 series router is PCMCIA. I was curious, can you just put that flash in a laptops PCMCIA port and write IOS...
I bought this router used on ebay and when it arrived, its nvram was not cleared from its old environment. I had to use the password recovery technique but, because I did not have the old password, I could not see waht the old confreg value was. This...
It looks like I will have to do some role reversal for my APs per this info:http://www.cisco.com/en/US/products/hw/wireless/ps441/products_qanda_item09186a0080094644.shtml#q21Q. What Autonomous IOS APs can act as a WGB? A. The AP1100, AP1130, AP20...
I found this but, what is the difference between an access point, a wireless bridge and a workgroup bridge?http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_example09186a00805b9b87.shtml#configure2
This is almost exactly what I need...http://www.cisco.com/warp/public/102/ap_as_wgb1.gifOnly difference is that my Root Access Point is an 1100 and my WGB is a 350. In that diagram both WAPs are 1240s. Does anyone know if my devices offer this functi...
Ok, I was confusing access server with reverse telnet. I upgraded to one of the images you recommended and all is good. I will take a crack at 12.3 when I get my flash upgrade.Thanks for all of your help!
