11-26-2006 08:57 AM - edited 03-05-2019 01:01 PM
I bought this router used on ebay and when it arrived, its nvram was not cleared from its old environment. I had to use the password recovery technique but, because I did not have the old password, I could not see waht the old confreg value was. This site told me it would be 0x100 or 0x2100. I took a guess at 0x100 but, the router cold starts to rommon. I can get it to boot to the flash image by running confreg at the rommon prompt but, I would like to set the correct confreg value so that it always boots from the ios on flash. I dont want to guess anymore as I run the risk of breaking the router.
Thank you for your help.
Solved! Go to Solution.
11-26-2006 09:28 AM
Hi Friend,
Go for 0x2102
HTH
Ankur
*Pls rate all helpfull post
11-26-2006 09:28 AM
Hi Friend,
Go for 0x2102
HTH
Ankur
*Pls rate all helpfull post
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide