Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a question regarding MSTP implementation. We are in the migration process to replace a standalone 6509 by two Nexus 9K switches.We used to have MSTP running between the 6509 (root) site A and the nexus SFP site B. All others switches are...
Hello,I have an issue with some packet loss between two switches: a 6509 and a 3600. The loss is not a lot, around ~0.2% but it is causing issue with some of our equipment connected to these switches.The switches connected at 2x 1gbps lacp link with ...
Hello!
I am facing a problem with an OSPF link between an ASR and a 6509. It has been working fine for months and all of a suden the process went down, and is stuck in EXCHANGE/EXSTART states . I have another OSPF link (for redundancy purpose) betw...
Bonjour!
I have been trying to set up a web proxy (squid) with an ASR 1000 using GRE Redirect/Return. The problem I am facing is that it seems that the ASR is not redirecting anything to the proxy cache server. Here is the snippet of the relevant c...
Thank you for taking the time to help out.The issue running MST in all SW is that the RJ45 Nk9 in site A have loads of VLANs that are not needed on other sites.If I run MST + PVST, how would you configure MST ? MST on Nk9 SFP on site A and B and all ...
Thank you for taking the time to help out on my case.Should I configure the Nk9 Site B and Site A on MST ? and the others swtiches can stay in pvst ?The problem running mst on all the swiches is that few vlans are used between sites but each site has...
Thank you for the links, I will have a look. Also looking at the graph I see that one of the port of the LACP is loaded at around 700mbps while the other one is only at 300mbps. Is it possible to even the load across the two ports somehow?
Thank you for your reply. Indeed it could be micro burst as the link is carrying internet traffic of many users. What I am seeing on the interfaces is a total output drops increasing, is this a counter related directly to the queues? GigabitEthernet3...
