I was able to get this working on CUCM 12 and CUC 12 with an existing partition, new translation pattern, new CTI route point, new directory number, and a new voicemail profile   partition: Site1Intra Contains translation pattern to transform site-specific abbreviated (4-digit) intra-site dialing to +E164   translation pattern: *3XXX partition: Site1Intra called party transform mask: *12162533XXX prefix digits: +   The CTI Route Point contains a DN \+*12162533XXX that will match the transformed digits   The DN is set to forward-all to VM using the new VM Profile   The new voice mail profile uses your existing pilot, but uses this mask +12162533XXX   Results Summary Calling Party Information Calling Party= +12162533920 Partition= DN:Directory URI:URI:ESN:onNetRemote:Site1Intra:USToE164:USPSTNNational:PSTNInternational:B2B_URI:USEmergency Device CSS= Line CSS= Site1International AAR Group Name= AAR CSS= Dialed Digits= *3945 Match Result= RouteThisPattern Matched Pattern Information Pattern= +*12162533XXX Partition= DN Time Schedule= Called Party Number= +*12162533945 Time Zone= Etc/GMT Call Classification= OnNet InterDigit Timeout= NO Device Override= Disabled Outside Dial Tone= NO Call Flow TranslationPattern:Pattern= *3XXX Partition= Site1Intra Positional Match List= +*12162533945 Calling Party Number= +12162533920 PreTransform Calling Party Number= +12162533920 PreTransform Called Party Number= *3945 Calling Party Transformations External Phone Number Mask= NO Calling Party Mask= Prefix= CallingLineId Presentation= Default CallingName Presentation= Default Calling Party Number= +12162533920 ConnectedParty Transformations ConnectedLineId Presentation= Default ConnectedName Presentation= Default Called Party Transformations Called Party Mask= *12162533XXX Discard Digits Instruction= None Prefix= + Called Number= +*12162533945 Directory Number:DN= \+*12162533XXX Partition= DN TypeCFACSSPolicy= Use System Default Call Classification= Unknown Forwarding Information Forward All: DN = VoiceMail = Yes VoiceMailBoxNumber = \+*12162533XXX CSS = VoiceMail Forward Busy Internal: DN = VoiceMail = No CSS = External: DN = VoiceMail = No CSS = Forward No Answer Internal: DN = VoiceMail = No CSS = External: DN = VoiceMail = No CSS = Forward No Coverage Internal: DN = VoiceMail = No CSS = External: DN = VoiceMail = No CSS = Forward Unregistered Internal: DN = VoiceMail = No CSS = External: DN = VoiceMail = No CSS = CFDF: DN = VoiceMail = No CSS = Pickup Group Number= Device:Type= CTI Route Point Device Status= UnKnown Device Name= TransferToVM Ignore Presentation Indicators= Disabled Logged Into Hunt Groups= Enabled Alerting Name= Dual Mode= Disabled Automated Alternate Routing (AAR) AAR Group Name= AAR Calling Search Space= AAR VoiceMail Status= Disabled AAR Destination Mask= AAR Prefix Digits= Alternate Matches Note: Information Not Available   ... View more

I am looking for a list of displays that are supported by the SX80. I will certainly go with commercial grade.  Thanks for the roomready link. ... View more

Hi Kureli, We have a PIX515e running 6.3.5 code.  Is there a way to create an IPSec remote access VPN tunnel on this device that will work with an apple iPad?  If so, could you offer a config please?  Thanks in advance ... View more