Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiWe've had a WS-X6708-10GE connected via slot 3 in a 6500 and has now been removed. The configuration is still showing in both start up and running configuration. How is this config removed?e.g.!interface TenGigabitEthernet3/1 no ip address shutdown...
HiWe are having intermittent problems where trunk links error-disable due to ETHCNTR-3-LOOP_BACK_DETECTED: Loop-back detected error.So far it has happened on 2950 (12.1(22)EA9) and 2960 (12.2(25)SEE2) switches, with the latter only having one trunk l...
2691IOS: 12.3(17)HiI'm trying to restrict internet access for a subnet; only allowing access to specific sites (windows/virus updates etc) using nbarI've had success blocking sites and allowing all others with the following:class-map match-any url-bl...
HiI keep losing connectivity to the management IP address on 2950 switches, although all other VLANs continue to work through it.When I plug in a console connection, loads of buffered messages are output (just port up/down messages), and then IP star...
HiThanks for the response.I'm unable to specify drop for class-default 'Drop cannot be configured in class-default'fa0/1 serves as an external interface for a number of subnets, not all of which i would like to restrict.
HiThanks for the response.It's true this switch is part of a cluster (historical) but this problem is occurring on both clustered and non clustered switches. I've checked both sides of the trunk for config/physical problems and they're both fine. All...
