Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello:We currently use a 7301 router as an LNS and have it configured to use a local IP pool and dynamically assigns an IP address to connecting DSL modems. We would like to start providing a static IP to a username that autheticates to a radius ser...
Hello:I was wondering if anyone can help with this. I have a cross connect from a ISP to our switch. The ISP is also using a switch. They are using a Foundry switch and we are using a 4948 switch. Both ports are 10/100/1000 copper ports and have s...
Hello:I have a branch site, and a main datacenter site. All traffic, VPN or not needs to go to the datacenter site now and not getting NATed from the branch site anylonger on its own ASA 5505 to the internet. I have been looking at some configs, and...
Hello All.I attached a simple diagram of four routers, rtr1 in each city are physically cabled between each other on port 2/1 and rtr2 are the same on thier 2/1 port. the local routers 1 and 2 are physically cabled between each other on port 1/19. ...
I have this 3560, WS-C3560-24TS-S. I am building a home lab, and wanted to know if the enterprise IOS would load on this standard switch so I could do practise labs with some routers I have been picking up here and there.
Thank you for the suggestion. I added debug radius and this is what was returned. instead of the user getting the IP y.y.y.20 the next available IP in the DHCP local pool y.y.y.13 is assigned to the user instead. Any other suggestions now that you...
Seems as though it still is not injecting the traffic. I used packet-tracer for ICMP pings. looks likeit is working based on the access list that is on the outside interface but itthen drops the packet for anti spoofing.. This is the results from p...
Can you provide some more information like what the routemap looks like. By default, the router will use theStatic route you have the serial interface defined as it has an admin distance of 0 overthe admin distance of 1 for the IP next hop. When you...
So we are using Version 8 on the ASA and we use split tunneling for our Remote VPN (Cisco VPN Client) users to use when they are on the road so only interesting traffic is sent through the tunnel and regular internet traffic is sent over thier ISP de...
I typically use ACL on the ingress. It just makes it easy to follow. The nice thing about the ASA is there is always an explicit deny unless you changed the default behaviour and made it a default allow which is available but have not met anyone wh...
