HP Openview is running on a hp-ux server. Cisco does not provide any adapters for hp-ux. Any simple ideas on how forward events from Openview to CW without buying an expensive OP package?Thanks
John,The underlying structure for VoIP is IP. The first step would be to gain a solid understanding of route/switch and then move into courses such as voice over. By having a route/switch understanding solidifies how data is routed and why. Voice...
Andris,You typically need LLQ on WAN links. It appears that this is a MAN connection - very high speed. If you are already confident that your traffic is marked correctly and the ISP will route the traffic according to your settings then this inter...
There are many examples on cisco.com. Here are some:http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008023ce5b.shtml http://www.cisco.com/en/US/tech/tk86/tk89/technologies_configuration_example09186a008011520d.sht...
Here are some code snippets:voice service voip allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip sip bind control source-interface Loopback10 bind media source-interface Loopback10Bind your SIP to a loopback....
