Hi,
Recently we upgraded MCU 5320 with 40 port licenses to Telepresence Server on the same appliance and in that process we converted these licenses to 10 Screen Licenses.
Now we want to re-host this on virtual TS and we ran into a problem with lice...
Hi Guys,Recently I purchased AIR-WLC2112-K9, but when I logged in I saw that system shows only 6 APs supported (I made print screen in addition).I'm running IOS v. 7.0.116.0 and I saw that there was some problems with earlier versions of IOS, but not...
Hi Dusan,I'm experiencing similar problem like you.In my situation I can't make CISCO PVC2300 to talk to DynDNS through RV120W.I tried port forwarding, putting it in DMZ zone, but no success and if anyone can help us on this it would be great.Further...
Hi,If you're looking for Small Business Router particularly you can look into RVS4000 model with 4 Gig Eth. ports.Anyway, 2911 is excelent choice, but just keep in mind that those 3 Gig ports are routed ones too.HTH
With wireless controller you have centralized control of all your APs and many other wonderful things, but it's all in datasheet here.In this case I would recommend AIR-LAP1141N-x-K9 which works on N standard, it has internal antennas and so on...If ...
Hello,I think solution to your problem is here:http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gt_tcl.html#wp1027195Section: How to Configure Cisco IOS Scripting with Tcl
Hello,In this case you can consider buying 50-users controller bundle AIR-CT5508-50-K9 which is much more cheaper.Of course in this case you have to use lightweight AP like AIR-LAP1242AG-x-K9 or similar, but like leolaohoo said first of all you have ...
