Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Everyone,
I'm wondering if someone may have encountered a similar issue in the past with the following configuration on a ME3600. Below is a description of what I'm currently seeing.
Attached is a topology of what is currently built.
Site A...
Hi Everyone,
As part of a migration from a 6500 chassis to a new Nexus deployment, I'm trying to replicate the following configuration for a RSPAN port. Currently, the port of the 6500 is configured as a destination RSPAN. The source port will remai...
Hi Everyone,
I remember in the past, 9000v would only work with certain linecard from a 9000 series platform. Can someone confirm if the built-in ports on an ASR9001 will work with a 9000v or will I need to purchase an MPA card as well.
Thanks.
--...
Hi Everyone,
I am wondering if someone might be able to shed some light on what I am missing to get the following configuration up and running for one of our Customers.
Scenario: Customer has an ASR9001-S which is doing all the core routing for the...
Hi Everyone,
After going through the documentation for the 9000v, I'm wondering if it's possible to setup the following scenario without using nV Edge. I have a pair of ASR9912 which are configured as standalone units. We have received 3 ASR9000v wh...
I changed it over using police instead of shape and the errors are no longer given when applying the policy-map. I'll be testing it out next week to confirm things are being rate-limited as expected.
Another option I was also thinking about was to a...
I'll give this a shot later tonight. I thought about policing but didn't test it. I'll also read up on qos-groups and let you know how it goes tomorrow afternoon.
Thanks.
--Dominique
Hi Reza,Thanks for the reply.I guess I should have stated that this is a 3750 Metro switch (ME-C3750-24TE-M). This switch connect to one of our P boxes via the ES ports. What I'm trying to build is an EoMPLS xconnect over SVI. I do agree that on "reg...
