Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
If you only need valid CPFs for testing, development, or lab environments, you don't necessarily need to implement the algorithm yourself. There are several online tools that generate CPFs with valid check digits following the official validation rul...
What you are asking for is generally not how Cisco AAA works with RADIUS. When you configure: aaa authentication login default group radius local the switch/router will use the local database only if the RADIUS server is unavailable, times out, or...
Since you can see the traffic being accepted in SSE, I would not focus only on the MX WAN MTU. That confirms packets are at least reaching the SSE side, so the next question is whether the return traffic is making it back to the client correctly.Beca...
One thing that stands out is that IPv6 hosts normally learn their default gateway through Router Advertisements (RA), even when the IPv6 address itself is configured manually. The fact that the same hosts work correctly behind the 3650 but not the 9...
The service instance configuration on the LAN-facing interface is usually there to classify and map incoming traffic into a specific bridge domain and VNI. The device on the other end of that link does not necessarily need to use the same service-ins...
