Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having problems trying to integrate CUE and CUCM. I created the Aplication User in the CUCM and gave it the correct Role and Password. Created also the Cti Ports and associated them to de Aplication user. The ping betwen both CUCM and CUE is OK....
Im trying to upgrade the firmware to a cisco ip telephone 7941 from version SCCP41.8-3-1S to SCCP41.9-2-3 but the prosess give me an error. at the end the display show "File not found SCCP41.9-2-3". I check that the firmware is install in the CUCM 7....
Hello Community, we have a "tralation pattern" (0500XXX) that makes the transformation to a "hunt pilot" (10800 internal dial number) this "hunt pilot" belongs to a "hunt list" and this belong to a "Line Group", but when the call is completed and the...
Hi fellas, I need some help in configuring multilink with a 512 kbps frame relay link and a E1 leased line. It turns out that a new service provider it's offering E1 leased lines with no encapsulation and I already have a 512 kbps frame relay link. B...
Hi Fellas, I'm having some troubles since a year ago trying to connect vpn tunnels site to site with cisco 1841 routers with security features and watchguard firebox x750e firewall. I have point to point leased lines or frame relay links bet...
Hi Gergely, thanks for your help, i'm new on this kind of system, so i need to know how can i login into cucm as jtapi user? and i restart the CTI Manager several times before. in fact i have another CUE working with other Aplication user, i tried to...
I already did the CUE reload several times. In fact i restore the CUE to factory default and still the problem. I have to clear that the CUE and The CUCM are remote connected through a WAN, but the pings betwen both are responding.se-10-10-113-253# p...
