The environment consists of 2 nodes.Primary - Personas: Admin, Monitoring, Policy service. Services: Session, Profiler and Device AdminSecondary - Personas: Monitoring. Services : None The project plan is to relocate the primary node, during wh...
I need to renew our Portal Certificate on ISE 2.6. I have begun the process of filling out the signing request and selected Portal for the certificates use. My question is about the Portal Group Tag. The current cert is using the " Default Portal ...
I'm having trouble with QoS marking on a Catalyst 9300 IOS XE, Version 16.08.01aI'm marking traffic on the input of the access-port's vlan and egress queueing based on a marking match on a Trunk port. I'm wondering if the trunk might be my issue? Th...
Looking for a throughput testing solution on the 9K's similar to using ttcp on previous IOS routers. Has anyone tried installing IPerf on IOS XE? or some other solution.
I have a couple of Catalyst 9300 Stacks licensed DNA/Network Essentials. One has managed to register and one is having difficulty logging the error "Fail to send out Call Home HTTP message"
When I configure a nameserver on this stack telnet re...
DACL not supported in FlexConnect.https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-12/config-guide/b_wl_17_12_cg/m_dACL.html#guidelines-and-restrictions-for-dacl
Would you post the interface configuration and possibly show auth session interface if possible. Is this deployment in closed mode or maybe low impact open with a pre auth acl?
Thanks again. I am however more confused by the licensing. The secondary node has the same resources as the primary. I'm not sure how we are in license compliance. Primary node : 16CPUs / 32GB MemorySecondary node: 16CPUs / 32GB MemorySmall VM li...
Thank you Mike.Cifelli, I have reached out to our rep to follow up on this. Our ISE is Version: 2.6.0.156. I have confirmed that the primary server is configured with 16CPUs / 32GB Memory which exceeds the table for the VM Small License but that i...