Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm working with a company who has a need to increase their MTU size to 9000 on 2 of the 5 interfaces connected to the Metro Ethernet ring. These 2 interfaces are for replication traffic mostly but the other 3 are for internal data and email. Their q...
I have a 1252 LAP that just won't associate to the WLC. It won't pull an IP address from my DHCP server either. I've tried a number of things to get this AP to associate but it just won't. Is it just a Bad Unit that needs to be replaced? Someone plea...
I'm using a MOE circuit here in Phoenix to connect several locations in a mesh configuration with my Main DC. I have one location that has 3-5% packet loss but I see no errors inbound or outbound on the interface. CEF is running and none of the other...
AP Type LWAPPAP Model AIR-LAP1252AG-A-K9IOS Version 12.4(21a)JA2 Radio Detail : 802.11b/g/n AIR-ANT2422DG-RRadio Detail : 802.11a/n AIR-ANT5140V-RCLIENT ADAPTERAtheros AR5009 802.11a/g/n Version: 7.7.0.406SettingsAP - WPA2 AES eap...
L2L VPN is dropping packets at Phase 5 because of a Configured rule. I have an isakmp sa but the client cannot connect to the destination here in my network. I'll post my access list config at bottom of Packet-tracer output.vpnASA01# packet-tracer in...
Thank you for your response JosephDoherty. I believe the origin of the packets and how they are assempled and placed on the line at the source determines packet size. Example would be a packet place on the line at 1500 bytes could travers an interfac...
Firmware version is 5.2.157.0System InformationManufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerProduct Version.................................. 6.0.196.159RTOS Ver...
I've reopened the ticket with my SP. I'm going to use your technique and perhaps sacrifice a small animal to the Network gods. Just kidding. You know I've heard of something like this before as an RFO... I think it's called PFM. Cheers,Michael
is this what you're asking for? Also the AP is located within 30 feet away at the most.Client RSSI is -81dBClient SNR is 17i've opened a TAC case. I'm about to deploy 140 devices and I need this working ASAP. So in the interest of time... I'll post t...
