Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,We have an 1131AG that is not working properly, I dont see any antennas in the running -config and the R led is blinking RED 1 time and 2 time. What can I do wih this AP? Is there some reset procedure? I've already reload the IOS.Thanks
Hi,We have a campus designed network that have a core level: 10720 routers on a ring topology, a distribution level: 3750 switches with ip routing, and an access level: 2950,2960,3550 POE and 3560 POE layer 2 switches. I want to know how many switch...
Hi,I want to know if a tool exists to get the hardware of a Unity server. Gusi from the tools depot get the software, but not the server ip like a mcs7815 or so on.On system properties I get:computer: Cisco CorporationCisco X86 class PC(R) 4 CPU /3....
Hi,I had a broadcast storm that killed some switches on my lan. The problem was a loop.The setup was : smc 5ports switch with a loop----3 com dual-speed hub ----catalyst 2950.The swithport setup was :interface FastEthernet0/1 switchport access vlan x...
Hi,Can I with Ciscoworks, make a report like:"switchport that have more than x MAC adresses" or "switchport without voice vlan that have more than x MAC adresses " The purpose is to track rogue non-Cisco hubs and switches on my lan/man. I can do it b...
I don't see any errors on the console on bootingWith show version I see only 1 FastEthernet interfaceWith show interfaces, I only see fastethernet 0 and BVI1, no dot11radio 0 or 1There is no match with the issue in the documentation you send.Thanks
Thanks for the clues, sadly it doesn't apply to my issue, I rebooted that switch not a long time before my trouble. The global bdpugard command was entered before.I don't figure how it happened now, maybe I should search elsewhere.J.S.
I posted this issue because I can't reproduce this behavior. I enter the command spanning-tree portfast bpduguard default in every access switches. It was on before the issue. I have devices in my lab with the same setup and, everytime I induce a loo...
