Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Folks, Anyone know if memory of a flash on ASA 5520 completely dead should I see anything when I'm connecting to console port ? (at least initial boot message?). I have a unit it looks ok but zero output via console. Tried all speed setting sa...
Hello,I have following issue PE1 receive different routes include default route originated from PE2 for VRF X.PE1 redistribute everthing from BGP to EIGRP with is used to exchange prefix between PE1 and PE1-CE.The issue that CE recive all prefix excl...
I can't do RMA since it old unit for the lab. The logic board looks ok so it kind strange. What about memory if all memory dead should I see something via console ? The status LED yellow and the rest green.
40 dB Excellent signal strength25-40 dB Very good signal s15-25 dB Low signal 10-15 dB Very low signal5-10 dB No signal strengthFor the Voice you need a minimum -25 dB
I found strange issue i have fixed problem but When i do have following scenario i can redistribute default route from vpn bgp proccess to eigrp.When EIGRP CE-PE1 , CE-PE2 and BGP AS number is same.the metric is 1 i know what you mean it wird issue...
Mohammed,Sorry maybe I've explained incorrect the issue.PE2 do originate default exacly as you said and I do see default route as iBGP learned inside PE1 bgp table more over i do see it inside routing table.on PE1 show ip route vrfB* 0.0.0.0/0 [200...
