Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Netpro,I've got an existing H-REAP deployment, and I've noticed that changes to the WLAN configuration on the WLC does not update the remote APs immediately. Is there a timer, or some logic that is used in updating APs that are configured as H-RE...
Hello Cisco Netpro!I've got a weird one that I can't nail down. These 2950s had previously been available over the web interface (client was managing them with CNA) and then I decided to bring the configuration up a little closer to best-practices.B...
Hello Cisco Netpro,Our client has asked us if there is a way to make the agent application minimize while they are logged into the queue system - whether they are ready for calls or not.Is this possible?Thanks!Paul
Hello Netpro world!I have an ASA 5505 with base license, running the new 8.2 code.I was interested in testing this perl script to automate configuration backups:http://6200networks.com/2008/02/06/using-a-script-to-back-up-asa-configuration/But I ran ...
Hi Cisco NetPro,I have a client (a University) that is using the WLC 4402 with software 4.2.176. They have a residence area for students that is serviced by the local cable provider for Internet. Additionally, the University wants to provide wirele...
I would recommend that you call your local police on their non-emergency number to schedule a test. That way when you do call they know they don't have to dispatch a police cruiser if by some unhappy chance you get a connection with one-way voice.
"transport input none" was definitely not it.But I determined that in an environment where multiple computers may be accessing the switch via CNA at the same time, each http session takes up a line on the vty.So with the following configuration I had...
Great thanks! With this configuration I was able to get the web interface back up:line vty 0 15 transport input ssh telnetThe bug id you referenced says this:"If vty line 15 is not configured for "transport input all/telnet, http access to the switc...
I have a client who has asked for this very feature, but I can't seem to find any documentation on it.Is this possible? Is it a setting we have to go via SSH to do?
