Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've one cisco 72xx series with some 8 V35 serial ports. If I run, for example, the command sh controller s1/0 I can exactly get the line speed of the PTT csu/dsu connected to this serial port.The same command, used on any kind of router different th...
I've a cisco 1841 IOS c1841-spservicesk9-mz.124-5b.bin whose serial ports are connected to a couple of leased lines. One connection (it's the same if I connect it to s0/0/0 or to s0/0/1) after minutes or hours of good work can drop with the router se...
Isdn backup layer 2 is constantly invoked with no reason for me as per local PTT main line is working perfectly.By activating debug dialer events and debug isdn events, I can't get relevant informations.I attached sh ver/sh run/debug resultsThanksOct...
I've a Call Manager 4.2(3)formed by a cluster composed by a Publisher and a Subscriber. I can get access to both the server, but when I am into the subscriber I cannot, for example, show the list of the phone by getting the following error message: "...
After that yesterday PTT rerouted the link to a new path between A-end and B-end, circuit came up and it has been perfectly working till yesterday evening. So, it was a line issue. Very strange problem as csu/dsu never showed any loop condition but t...
Shut no shut can restart the connection but it didn't always work and it never completely fixed the trouble. After having replaced the csu/dsu at A-end and B-end, now PTT has rerouted the link to a new path and it's about 1 hour it's working fine, bu...
Excuse me for the rating system. I didn't want to be unfair. I do not often use cisco forum and I was thinking that I should give you the best rating just at the end of the conversation. Now I know I can give you the best rating at any time. When you...
Just to try I activate anyway debug bri:Oct 14 11:32:56: BRI0/1/0: In state F3, Received code Activate request downstream, Info 2 receivedOct 14 11:32:56: BRI0/1/0 : changing state to F6Oct 14 11:32:56: BRI0/1/0: In state F6, Received code Activation...
