Is there any way, that a fmc managed ftd can act as ntp server for other devices. fmc,ftd.ntpI running fmc 1700 version 7.7.0 and ftd 1220cxThanks Carsten.
I configured IKEv2 VPN with a traffic map for the VPN which overlaps the local LAN.Example:Traffic Map for the VPN: 192.168.0.0/16Local Lan IP RV260: 192.168.1.1/24 With the firmware RV16X_26X-v1.0.01.05-2021-09-28-06-49-17-AM.img the configuartion w...
I have configured an IKEv2 IPSec Site-to-Site VPN between ASA (Firepower 1010) and RV260.I make an config like https://www.cisco.com/c/de_de/support/docs/security-vpn/ipsec-negotiation-ike-protocols/117337-config-asa-router-00.html for the ASA with P...
Thanks Jens for the answer.I was hoping it would work by now. Then we'll have to look for another solution for the replaced Cisco routers. Is such a feature perhaps planned?
For all who are interested. This is not a configuration problem, this is a firmware problem on the rv260!The same VPN IKEv2 configuration between rv340 and the asa works.
Hi,when I configuring 'call-park system application' under telephony service the pickup between Skinny Phones doesnot work. Then I can use pickup from SIP Phones. (I have also activated 'fac standard' under telephony services)When I remove the 'call-...